Rotary Rinsing, Filling & Capping Machine for Bottle
32-32-10 3-in-1 Hot Filling Machine
Contact Person
SHOLEH MUHADI
Hp. 081332224419 -
085755094199
Email : m.sholeh77@yahoo.com
This is high standard advance Touch Screen
PLC base Rotary Rinsing Filling Capping Machine. This machine mainly
used for washing, filling and capping of Carbonated/Non-Aerated Drink
such as Mineral water, Pure Water, Non-Gas Wine Drink, Beer, Synthetic
Flavored Juice and so on. The Machine design is shorten the time for the
packaging of Pet Bottle, outside contamination and increased the
sanitation condition through out the machine and economical too.
It
adopts Bottom holding type conveying-bottle structure to make changing
bottle model more convenient, faster and more EST. The main machine
adopts advanced PLC control technology.
Product Description
3-in-1 filling monoblock,
combined with rinsing, filling and capping. It is innovated and
designed in the requirement of non-carbonated energy drinks, juice, tea,
on the bases of introducing, digesting and absorbing advanced
technology from Germany and Italy.
Main features
Rinser
Spring cramps are used in the bottle washing process. The empty bottles can be turned over 180° Along the conveying rail. There are two times of internal and external washing, the efficiency of bottle washing is high.
Rinsing machine adopts Sunswell original overturn and double-opened bottle clip. Bottle clip lock the bottleneck, the material of bottle clip is SUS304, which is hygienic and durable.
Bottle clip equipped with efficient spray on nozzle. The extrusive droplet with 15° Angle ensures to wash all side of the bottle, and can save the water.
Filler
The design of filling structure is reasonable and hygiene dead angle, the run of equipment is stable, it can control the material from the bottleneck, the control accuracy is within ± 2mm.
The filling valve material is SUS304
The filling system has liquid level automatic control.
Filling valve lift is controlled by the valve elevator, after filling valve contact the bottleneck, it start to fill.
Bottle is conveying by the wheel in the filling part.
The juice or other hot beverage can be backflow by return tank to control filling temperature.
Capper
Screw capping machine is most precision part in the 3-1 machine, it has a big influence to the goods stability and defective rate. Our screw capping has following feature.
Equipment structure
Base
Rotary rinser
Rotary filler
Rotary capper
Bottle infeed and outfeed system
Control
Main configuration
Touch screen: THINGET or Weinview
PLC program controller: Mitsubishi or Omron
Inverter: Mitsubishi or Omron
Photoelectrical controller: Omron
Proximity switch: Omron
Other electrical components: Schneider
Pneumatic component: Airtac
Water pump: Nanfang
Main motor: Siemens
Bearing: Harbin
Technical Parameters
Rinsing heads: 32
Rinsing water consumption: 3.5T/H
Filling heads: 32
Capping heads: 10
Capability: 12, 000bph (500ml)
Bottle height: 150~310mm
Bottle diameter: 50~100mm
Suitable cap: Plastic Screw Cap
Total power: 8.63kw
Outline: 3430mm× 2630mm× 2750 mm
Weight: 7500kg.
Rotary Rinser Filler Capper (CGF 32-32-10)
14000 BPH ROTARY RINSER-FILLER-CAPPER (for non-carbonated beverages): This machine has been specially designed making it suitable for production of pure drinking water that can be filled and marketed in PET bottles.
The maximum quality is ensured in this machine with ISO 9001 certified manufacturing facility, which has brought great fame and reputation of this machine in the respective industry. Mitsubishi and Omron have manufactured the complex electronic parts along with the computerized PLC. Italy and Japan have designed the pneumatic controls. Besides, the contact parts of the bottles have been made sure to be manufactured from food grade materials. The controls and information on the production procedure are available for digital display and can be adjusted on the touch panel controlled by PLC.
Contact Person
SHOLEH MUHADI
Hp. 081332224419 - 085755094199
Email : m.sholeh77@yahoo.com
Procedure:
By clamping the bottles at the neck, they are suspended within very light PET bottles. The empty bottles are cleaned very thoroughly and turned upside down before filling them with the required product. There is almost no dripping or leakage owing to the error free and efficient functioning of the pressure filling nozzles.
The Monoblock Rinser-Filler-Capper has the following parts:
Main features
Rinser
Spring cramps are used in the bottle washing process. The empty bottles can be turned over 180° Along the conveying rail. There are two times of internal and external washing, the efficiency of bottle washing is high.
Rinsing machine adopts Sunswell original overturn and double-opened bottle clip. Bottle clip lock the bottleneck, the material of bottle clip is SUS304, which is hygienic and durable.
Bottle clip equipped with efficient spray on nozzle. The extrusive droplet with 15° Angle ensures to wash all side of the bottle, and can save the water.
Filler
The design of filling structure is reasonable and hygiene dead angle, the run of equipment is stable, it can control the material from the bottleneck, the control accuracy is within ± 2mm.
The filling valve material is SUS304
The filling system has liquid level automatic control.
Filling valve lift is controlled by the valve elevator, after filling valve contact the bottleneck, it start to fill.
Bottle is conveying by the wheel in the filling part.
The juice or other hot beverage can be backflow by return tank to control filling temperature.
Capper
Screw capping machine is most precision part in the 3-1 machine, it has a big influence to the goods stability and defective rate. Our screw capping has following feature.
Equipment structure
Base
Rotary rinser
Rotary filler
Rotary capper
Bottle infeed and outfeed system
Control
Main configuration
Touch screen: THINGET or Weinview
PLC program controller: Mitsubishi or Omron
Inverter: Mitsubishi or Omron
Photoelectrical controller: Omron
Proximity switch: Omron
Other electrical components: Schneider
Pneumatic component: Airtac
Water pump: Nanfang
Main motor: Siemens
Bearing: Harbin
Technical Parameters
Rinsing heads: 32
Rinsing water consumption: 3.5T/H
Filling heads: 32
Capping heads: 10
Capability: 12, 000bph (500ml)
Bottle height: 150~310mm
Bottle diameter: 50~100mm
Suitable cap: Plastic Screw Cap
Total power: 8.63kw
Outline: 3430mm× 2630mm× 2750 mm
Weight: 7500kg.
Rotary Rinser Filler Capper (CGF 32-32-10)
14000 BPH ROTARY RINSER-FILLER-CAPPER (for non-carbonated beverages): This machine has been specially designed making it suitable for production of pure drinking water that can be filled and marketed in PET bottles.
The maximum quality is ensured in this machine with ISO 9001 certified manufacturing facility, which has brought great fame and reputation of this machine in the respective industry. Mitsubishi and Omron have manufactured the complex electronic parts along with the computerized PLC. Italy and Japan have designed the pneumatic controls. Besides, the contact parts of the bottles have been made sure to be manufactured from food grade materials. The controls and information on the production procedure are available for digital display and can be adjusted on the touch panel controlled by PLC.
Contact Person
SHOLEH MUHADI
Hp. 081332224419 - 085755094199
Email : m.sholeh77@yahoo.com
Procedure:
By clamping the bottles at the neck, they are suspended within very light PET bottles. The empty bottles are cleaned very thoroughly and turned upside down before filling them with the required product. There is almost no dripping or leakage owing to the error free and efficient functioning of the pressure filling nozzles.
The Monoblock Rinser-Filler-Capper has the following parts:
- Capping Station
- Electrical Panel
- Filling Station
- Monoblock Base
- Rinsing Station
It is a method of packaging that removes air from the package prior to sealing.It is used for long term storage of Packaging Equipment
BalasHapus